Header

Introduction

Now you can take advantage of big opportunities in the new and replacement market. Offer a stable door fitted with new generation security.

All the advantages of a stable door for your customers...

What country dwellers have always appreciated - the stable door entrance has real benefits: releasing humidity, admitting fresh air, keeping pets out or keeping children in! A secure yet flexible feature door for ANY home!

Not just for the country - a practical, flexible and secure solution!

Now easier to install - easier to stock with GU's G4 Rhinobolt security.

The GU Ferco Stable lock offers faster, simpler - and more economical - locking for stable doors. It couples the two leaves together easily while providing a very secure door.

• Based on the successful G4 series
  Stable doors can be made from one door bolt with minimum time and effort and no waste, all without changes to the manufacturing process. the fabricator gains a massive 300% cost on previous parts needed to produce the same style of door.
• Simple Clip together system
  Stable doors can be easily and inexpensively converted to a rigid door. When in use, the system is completely concealed but still offers the excellent security characteristics of Rhinobolt.
• Easy fit - eliminates wastage
  The lock is easy to fit and also eliminates wastage - just one bolt and one accessory kit are required for each stable door.
• Patented Rhinobolt cut-off line
  A cut-off line on the door bolt faceplate shows fabricators where to cut off the lower part of the bolt (for stable door bottom leaf/sash)
• Cut off lower half of the bolt is used for the bottom leaf/sash instead of being discarded
  This feature means that fabricators do not need to buy an additional hook extension. This results in a cost saving of around 30%.
• Locking Points are placed in same position as those of the full door bolt
  This enables standard routing positions to be achieved for hook casings.

Application range

Maximum Sash Rebate Height	2170mm
Handle Height	1020mm

Go to top

Features

Image