Hot Melt P5125 Butyl Insulating Glass Sealant

Bostik P5125 Hot Melt Butyl Edge Sealant is a single part, 100% solids compound, specifically designed for the edge sealing of factory produced double glazing units.

 

Very low MVTR.  A key factor in determining the unit life is the MVTR (moisture vapour transmission rate) of the sealant.  Bostik P5125 has one of the lowest MVTRs of any edge sealant resulting in prolonged unit life.

 

Health and Safety.  Unlike two part systems, P5125 Hot Melt Butyl does not chemically cure, so there is no requirement for harmful solvents to flush out application equipment.

 

Reliability.  Bostik P5125 has been used successfully for over a decade.  Each batch of P5125 produced is tested to ensure compliance with strict quality standards.

 

Total Technical Support.  Bostik’s experience in the IG market goes back over 20 years.  Bostik’s technical department has a sealed unit testing facility and can provide help and advice on all aspects of sealed unit production.

 

Standards met.  Bostik P5125 enables the production of quality sealed units.  Many users have obtained certification to relevant standards.

 

Zero Waste.  The special non-slump properties of P5125 means that the sealant is clean in application.  Bostik P5125 is also a single part system that requires no purging of the application equipment, eliminating sealant waste.

 

Rapid Unit Production. Bostik P5125 is single part and smooth flowing enabling fast, trouble free gunning and speedy unit production.  With no need to purge the machine and the machine already at application temperature (controlled by a timer), production can begin immediately.

 

Rapid unit handling.  Bostik P5125 sets fast; within 2 minutes and units can generally be transported within 5 minutes, rather than the several hours required by other systems.  A flexible production system is made possible allowing you to respond rapidly to customer requirements.  Emergency units can be produced and despatched to site within minutes, rather than in hours.

 

Environmentally sound.  Using Bostik P5125 does not damage the environment.  It is a non-hazardous material, so there are no special waste requirements.  The popular 7kg P5125 packaging size consists of cardboard with release finish only.  The product itself can be released cleanly and without product waste from the packaging.

 

Improved space utilisation.  Storage space for materials and finished units can be kept to a minimum.  The popular 7kg P5125 pack size is easy to store and convenient to handle.  Finished units can be loaded into vehicles for despatch shortly after production.  Space previously used for storage can be used for more productive purposes.

The quality Sealant with the competitive edge

Item	Code	Carton Size
Bostik 5125 Hotmelt 7kg	H/MBP5125/7	7kg
Bostik 5125 Hotmelt 13 litre	H/MBP5125/13	13 litre

Evo-stik HiFlo 6481 Hot Melt

Evo-Stik HiFlo Hot Melt sealant 6481 has been especially formulated for use in the production of double glazing units. As HiFlo 6481 will set in 2 minutes from its molten state becoming stronger as it cools, assembled units can be moved in 2 to 5 minutes. This means that units can be sealed and glazed in the same day. The production of sealed units using HiFlo 6481 is a relatively simple operation using standard dispensing equipment but since only one component is involved, no cleaning or purging of dispensing equipment is required at the end of every production period.

• Requires no mixing or measuring
• Will set in 2 minutes from its molten state
• Units can be installed almost immediately after assembly
• No wastage--can be re-heated
• Application is made easy by means of standard dispensing equipment
• No cleaning or purging of dispensing equipment required
• Fully tested to the requirements of BS 5713

Item	Code	Carton Size
Evode 6481 Hotmelt 6 litre	H/ME6481/6	6 litre
Evode 6481 Hotmelt 14 litre	H/ME6481/14	14 litre

Hotver 2000 Hot Melt

Manufactured by Italian Company Fenzi, HotVer 2000 is a one component hot melt sealant for insulating glass. It has excellent physical-chemical characteristics:

• easy to apply
• very good resistance to high and Iow temperatures
• perfect adhesion

Item	Code	Carton Size
Fenzi Hotmelt 6kg	H/MFENZ1/6	6 kg

Evo-stik 2900 Primary Sealant

This is included in the two-part section. Take me there now.

Nozzles for Hot Melt Guns

5000 Hot Melt Butyl Insulating Glass Sealant

Bostik 5000 hot melt butyl sealant has been specifically formulated for use in the production of insulating glass units. Bostik 5000 is a single part butyl rubber based sealant which, when applied at the correct temperature, sets quickly from its molten state allowing units to be moved from their assembly location between two and five minutes after application. Units can therefore be sealed and glazed within the same day. Bostik 5000 has a high output and fast heat loss enabling optimum turn round of unit production. The combination of these properties also means that corner defects can be easily avoided thereby ensuring a complete seal around the unit.

• Compatible with all types of manual dispensing equipment currently available.
• Quick-setting from the molten state.
• Clean application with no wastage.
• No cleaning or purging of dispensing equipment required.
• Can be used as a secondary seal in conjunction with a P.I.B. primary sealant such as Bostik 2000.
• Convenient pack size for easy storage.

Typical Performance Data (approx.)

Moisture Vapour Transmission rate	Very Low
Application Temperature	From +185°C to +200°C

Product Characteristics

Packaging	6kg block, 190kg drum
Constitution	A blend of butyl rubber with other synthetic polymers and resins, which contain no volatilematerials
Colour	Black
Form	Rubbery solid
Density	1.19 g/cm3
Shelf life/ Storage	At least 12 months from date of manufacture when stored unopened in a cool, dry place within the temperature range +5°C to +25°C

Item	Code	Carton Size
Bostik 5000 Hot	H/MB5000/6	6kg

This is included in the miscellaneous section. Take me there now.